C002-2 straight five-port electrolytic cell-plug-in

1. Pool body material: high borosilicate glass

2. The electrolytic cell is an absolutely sealed electrolytic cell system, which is often used in a three-electrode system. The volume of the electrolytic cell ranges from 10ml to 500ml, and it can also be customized according to requirements.

3. The electrode part of the electrolytic cell realizes the internal insertion and removal of the electrode through the earphone jack on the cover, so that the three-electrode system is absolutely sealed.

4. The electrode of the electrolytic cell must be matched with the cell body.

5. The electrolytic cell can not add sand core salt bridge or Lujin capillary can only use silver silver chloride electrode.

6. The electrolytic cell adds a valve [door and aeration device to achieve atmosphere protection, and the valve connected to the aeration device] is the direction of air intake.

7. The electrolytic cell is an absolutely sealed system and can be evacuated (less than -100kpa) or pressurized through a valve. The bottom of the electrolytic cell must be made into a round bottom shape for pressurization. At the same time, the pressure must not be greater than 0.6MPa for safety reasons.

8. Due to the process limitation of the electrolytic cell, the inner glass of the double-layer electrolytic cell is relatively weak, so it is forbidden to pressurize.

9. The electrolytic cell is divided into two types: single-layer and double-layer.

10. The double layer adds the function of a constant temperature water bath on the basis of the single layer. The constant temperature and temperature effect of the measured solution in the electrolytic cell is achieved by continuously passing circulating constant temperature water into the jacket layer of the electrolytic cell.

11. Electrolytic cell cover material: PTFE, the size of the cover varies according to the volume of the electrolytic cell, the size of the inner screw cover is basically 50mm,60mm, 70mm