C008-10 replaceable membrane 3H electrolytic cell

1. The electrolytic cell is modified on the basis of C007-10, and a Lukin capillary is added at the junction of the reference electrode chamber and the working electrode chamber

2. The working electrode, auxiliary electrode and reference electrode of the electrolytic cell can be matched as required, and the matched electrodes must be lengthened

3. The cell body of the electrolytic cell is made of high borosilicate glass, and most of the single-layer cell body has an overhead layer design, which effectively eliminates solution hiding

4. This electrolytic cell is often used in a three-electrode system, the volume of the electrolytic cell is 10ml

5. The electrolytic cell is divided into two electrolytic cell systems, relative sealing and Jedi sealing. The cathode chamber (working electrode) and the anode chamber (contrast electrode) are separated by ionic membrane (provided by the user), and the two chambers are sealed and linked by a chain. It is convenient to replace the diaphragm. The reference electrode and the working electrode are in the same room, which effectively reduces the R drop.

6. The glass sealing part of the electrolytic cell adopts an internal threaded port design, and the sealing effect is achieved by tightening the PTFE and squeezing the sealing ring.

7. The relative sealing of the electrode part of the electrolytic cell is realized on the PTFE plug, and the sealing effect is achieved by squeezing the O ring by the sealing screw

8. The absolute sealing of the electrode part of the electrolytic cell is achieved through the earphone jack on the polytetrafluoroethylene cover to realize the internal plugging and unplugging of the electrode, so that the electrode system is absolutely sealed.

9. The electrolytic cell is equipped with an aeration device that can ventilate below the liquid surface, and the atmosphere is carried out according to different experiments.

10. The electrolytic cell can add a sampling port on the cell body, at this time additional costs are required. 11. The electrolytic cell can not add valves, all absolute sealing is realized by quick connection, the diameter of the PTFE tube used for quick connection is 3mm.