C010 flat corrosion test cell

1. Pool body material: high borosilicate glass

2. The working electrode sheet of the electrolytic cell is a sheet-shaped working electrode. The sample installation is simple and convenient, easy to disassemble, and easy to handle.

3. The electrolytic cell is suitable for corrosion testing of flat samples

4. The side of the electrolytic cell has a round hole with a fixed area of ​​1 square centimeter (the required size can be customized according to requirements), and an O-ring that can be sealed. After placing the sample on the round hole O-ring, the tested sample is pressed tightly. Achieve sealing effect

5. The electrolytic cell is equipped with F-type air inlet that can ventilate up and down the liquid surface. The atmosphere is protected according to the experiment. When the experiment starts, please stop the ventilation below the liquid surface and only keep the ventilation on the liquid surface.

6. The conductive link of the working electrode of the electrolytic cell is sampled using the principle of gold-plated copper sheet extrusion operation sample. The gold-plated conductive copper sheet has good corrosion resistance and aesthetics. 7. The electrolytic cell sample holder is made of 316F stainless steel, which is both beautiful and anti-corrosion. 8. In order to achieve a better experimental diffusion effect, the electrolytic cell has added a stirring bar under the cylindrical tank body. Place it in the pool and place the pool body on the magnetic stirrer for magnetic stirring.

9. The electrolytic cell is divided into two forms, single-layer and double-layer. The double-layer adds a constant temperature water bath function on the basis of the single layer. The constant temperature water circulating through the CC ring is continuously passed into the jacket layer of the electrolytic cell to make the electrolysis. The inside of the pool achieves a constant temperature effect.

10. Material of electrolytic cell cover: PTFE, the size of the cover varies according to the volume of the electrolytic cell.

11. The auxiliary electrode (counter electrode) of the electrolytic cell is matched with a 20*20 platinum mesh electrode. 12. The electrolytic cell is equipped with standard silver chloride electrode R1060-only

13. In order to achieve better results in the experiment, the electrolytic cell is equipped with a special salt bridge for the reference electrode. If the corrosion test needs to avoid chloride ions, add saturated potassium nitrate solution to the salt bridge

14. The electrolytic cell is equipped with F-type air inlet and a special liquid seal to prevent the gas from flowing back out of the electrolytic cell.

15. In order to better read the temperature of the cell body when the electrolytic cell is at a constant temperature, the double-layer cell is equipped with a thermometer, and the single-layer cell needs to be purchased separately