C012-2 All Quartz Square Photoelectrochemical Cell

1. The electrolytic cell is improved on the basis of C012-1. The cell body is increased with a sealing cover to achieve a sealing effect.

2. The material of the electrolytic cell is high permeability quartz

3. The light transmittance of the electrolytic cell is not less than 95%

4. The electrolytic cell is-body polished, not glued molding.

5. The electrolytic cell can withstand a maximum temperature of 900°C. If the cell body is heated for sterilization, please separate the cover from the cell body

6. The cover of the electrolytic cell is made of PTFE (the cover can be punched according to requirements, round holes or square holes can be punched)

7. The electrolytic cell can add sand core salt bridge or Lukin capillary salt bridge

8. The electrolytic cell is an open system, if you need a sealed system, please refer to C012-2