C013-2 thin-layer spectroscopy test electrochemical cell

1. The body of the electrolytic cell is polished with all quartz, and the four sides are light-transmissive and refuse to be glued. 

2. The light transmittance of the quartz of the electrolytic cell is above 95%

3. The cover of the electrolytic cell is PEEK

4. The supporting electrode of this electrolytic cell, the reference silver silver chloride electrode (diameter 3.0mm), the comparison platinum wire electrode diameter 0.5mm, the working electrode platinum mesh electrode (6*7mm)

5. The working electrode of the electrolytic cell can also be replaced with a glassy carbon or gold plate with a diameter of 3mm according to requirements.

6. The size of the gap between the electrolytic cell is 8*6.5*1mm

7. The electrolytic cell is a square cell body with a size of 12*12mm

8. The absolute sealing system of the electrolytic cell

9. The quartz sealing part of the electrolytic cell is designed with an external threaded port, and the inner core is made of 360-degree rotating PEEK material, so that the electrode accurately corresponds to the gap, and is sealed by tightening the PEEK material outer cover.

10. The sealing of the electrode part of the electrolytic cell is realized on the PTFE plug, and the sealing effect is achieved by squeezing the O ring by the sealing screw