C013-UV4000 Quartz Spectroscopy Cell

1. The body of the electrolytic cell is polished with all quartz, and the four sides transmit light and refuse to glue.

2. The light transmittance of the quartz of the electrolytic cell is above 95%

3. The lid of the electrolytic cell is polytetrafluoroethylene

4. The electrolytic cell is equipped with air inlet and outlet devices

5. The supporting electrode of the electrolytic cell, the reference silver silver chloride electrode (diameter 3.0mm), the platinum wire electrode diameter 0.5mm, the working electrode glassy carbon electrode 3mm

6. The working electrode of the electrolytic cell can also be replaced with a gold disk, platinum disk or other electrodes with a diameter of 3mm according to requirements.

7. The electrolytic cell is a square cell body with a size of 12*12mm

8. The absolute sealing system of the electrolytic cell

9. The quartz sealing part of the electrolytic cell adopts an internal threaded port design, which is sealed by tightening a cover made of polytetrafluoroethylene.

10. The electrode part of the electrolytic cell realizes the internal plugging and unplugging of the electrode through the earphone jack on the cover, so that the electrode system is absolutely sealed.