C015 All Quartz Sealed Small Photoelectrochemical Cell

1. The body of the electrolytic cell is welded by the all-quartz fusion method, and it refuses to stick.

2. The light transmittance of the quartz in the electrolytic cell is above 95%

3. The cover of the electrolytic cell is polytetrafluoroethylene

4. The electrolytic cell can be equipped with air inlet and outlet devices

5. The electrode of the electrolytic cell needs to be purchased separately

6. The reference silver silver chloride electrode of the electrolytic cell-generally choose the silver silver chloride electrode (diameter 3.8mm), the diameter of the platinum wire electrode is 0.5mm, the working electrode glassy carbon electrode is 3mm

7. The working electrode of the electrolytic cell can also be based on It is required to replace the working electrode with a gold disc, platinum disc or other electrode with a diameter of 3mm.

8. Relatively sealed system of the electrolytic cell

9. The quartz sealing part of the electrolytic cell adopts an internal threaded port design, which is sealed by tightening a cover made of polytetrafluoroethylene.

10. The electrode part of the electrolytic cell is sealed on the PTFE plug, and the sealing screw is used to squeeze the O ring to achieve the sealing effect.

11. For absolute sealing system, please refer to C015-2