C017 All Quartz Photoelectrochemical Cell

1. The electrode part of the electrolytic cell realizes the internal plugging and unplugging of the electrode through the earphone jack on the cover, so that the electrode system is absolutely sealed.

2. The electrode of the electrolytic cell needs to be purchased separately, but it must be matched with the cell. 3. The body of the electrolytic cell is welded by the all-quartz fusion method and refuses to stick.

4. The light transmittance of the quartz in the electrolytic cell is above 95%

5. The lid of the electrolytic cell is polytetrafluoroethylene

6. The electrolytic cell can be equipped with air inlet and outlet devices

7. The reference electrode of the electrolytic cell-generally chooses silver silver chloride electrode (diameter 3.8mm).

8. The contrast electrode of the electrolytic cell is a platinum wire electrode or platinum sheet electrode with a diameter of 0.5 mm.

9. The working electrode of the electrolytic cell is a glassy carbon electrode. The working electrode can also be replaced with a gold disc, a platinum disc or a 3 mm diameter disc according to requirements. Other electrode clamps.

10. The absolute sealing system of the electrolytic cell

11. The quartz sealing part of the electrolytic cell adopts a flange port design, and is sealed by using a lock ring to lock the cap made of polytetrafluoroethylene and squeeze the sealing ring.