C018 side-illuminated all-quartz electrochemical cell-02

1. The electrolytic cell has been improved on the basis of C018-1

2. The electrode part of the electrolytic cell is sealed through the earphone jack on the cover to realize the internal plugging and unplugging of the electrode, so that the electrode system is absolutely sealed.

3. The electrode of the electrolytic cell needs to be purchased separately, but it must be matched with the cell. 4. The body of the electrolytic cell is welded by the all-quartz fusion method and refuses to stick.

5. The light transmittance of the quartz in the electrolytic cell is above 95%

6.The lid of the electrolytic cell is polytetrafluoroethylene.

7. The electrolytic cell can be equipped with air inlet and outlet devices

8. The reference silver silver chloride electrode of this electrolytic cell-generally choose silver silver chloride electrode (diameter 3.8mm), the contrast electrode is a platinum wire electrode with a diameter of 0.5mm or a platinum chip electrode. Working electrode, glassy carbon electrode, 3mm

9.The working electrode of the electrolytic cell can also be replaced with a gold disk, platinum disk or other electrodes with a diameter of 3mm according to requirements.

10. The absolute sealing system of the electrolytic cell

11. The quartz sealing part of the electrolytic cell adopts a flange port design, and is sealed by using a lock ring to lock the cap made of polytetrafluoroethylene and squeeze the sealing ring.