C019 side light electrochemical cell

1. The electrolytic cell is improved on the basis of C019-1

2. The electrolytic cell realizes atmosphere protection by adding a valve and aeration device, and the valve connected with the aeration device [the door is the direction of the air intake

3. The electrolytic cell is an absolutely sealed system and can be evacuated (less than -1Mpa) through the valve]. The electrolytic cell can be slightly pressurized, and the pressure is not required for safety.

4. The inner glass of the double-layer electrolytic cell is relatively weak due to technological limitations, so it is forbidden

5. The working electrode, auxiliary electrode, and reference electrode of the electrolytic cell must be customized to match the electrolytic cell.

6. The electrode part of the electrolytic cell is sealed through the earphone jack on the cover to realize the internal plugging and unplugging of the electrode, so that the electrode system is absolutely sealed.

7. The cell body material of the electrolytic cell is high borosilicate glass

8. The light window of the electrolytic cell is made of quartz, and the light transmittance is greater than 95%

9. The light window part of the electrolytic cell is connected with the cell body with a lock ring to ensure sealing, and the quartz light window can be replaced quickly and conveniently.

10. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml and can also be customized according to requirements.

11. The electrolytic cell is an absolutely sealed electrolytic cell system,

12. The glass sealing part of the electrolytic cell adopts an external threaded design, and the inner core adopts a 360-degree rotating PTFE, so that the electrode accurately corresponds to the light window, and is sealed by tightening the outer cover of POM material.

13. The electrolytic cell is equipped with an aeration device that can ventilate below the liquid surface, and the atmosphere is different according to the experiment.

14. The electrolytic cell can add a sampling port on the cell body, and an additional cost is required at this time.

15. The electrolytic cell is divided into two types: single-layer and double-layer

16. The layer adds the function of a constant temperature water bath on the basis of a single layer. By continuously passing circulating constant temperature water into the jacket layer of the electrolytic cell, the measured solution in the electrolytic cell reaches a constant temperature effect.