C023 H-type electrolytic cell with light window and replaceable membrane

1. Pool body material: high borosilicate glass

2. The electrolytic cell is a relatively sealed electrolytic cell system, which is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml, and it can also be customized according to requirements.

3. The glass part of the electrolytic cell is squeezed by the screw of the cover for 0 times to achieve the sealing between the cell and the cover, and the electrode part is also squeezed by the sealing screw for 0 times to achieve the sealing effect. 4. The electrolytic cell is equipped with sand core salt bridge or Lukin capillary (one of them -).

5. The electrolytic cell is equipped with air inlet and outlet holes, and the air inlet contains an aeration device, and the atmosphere is protected according to different experiments.

6. The electrolytic cell is a relatively sealed system. For better sealing, please pay attention to the C002 -2 absolute sealed system.

7. The electrolytic cell is divided into two forms: single-layer and double-layer. The double-layer adds a constant temperature water bath function on the basis of the single layer. The circulating constant temperature water is continuously introduced into the jacket layer of the electrolytic cell to make the inside of the electrolytic cell The test solution reaches a constant temperature effect.

8. The material of the cover of the electrolytic cell: PTFE, the size of the cover is different according to the volume of the electrolytic cell, the diameter of the inner screw cover is basically divided into

35mm, 50mm, 60mm, 70mm

9. This electrolytic cell breaks through the limitation of the traditional five-port electrolytic cell caliber to the large-scale platinum electrode, and the bow|collar electrolytic cell enters the era of big mouth.

10. This electrolytic cell can be used in conjunction with a rotating disk electrode. However, the sealing of the pool was also affected accordingly, and the structure of the lid was also changed, requiring additional costs.