C024 double-light window replaceable membrane H-type electrolytic cell

1. The electrolytic cell is actually upgraded on the basis of C023-1. A light window is added, so that both the cathode and anode chambers have light windows.

2. The light window of the electrolytic cell is made of quartz, and the light transmittance is greater than 95%

3. The light window part of the electrolytic cell is connected with the cell body by a lock ring to ensure sealing, and the quartz light window can be replaced quickly and conveniently.

4. The working electrode, auxiliary electrode, and reference electrode of the electrolytic cell can be matched as needed, and the matched electrodes must be lengthened

5. The cell body of the electrolytic cell is made of high borosilicate glass, and most of the single-layer cell body has an overhead layer design, which effectively breaks the hiding of the solution.

6. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml, and it can also be customized according to requirements.

7. The electrolytic cell is a relatively sealed electrolytic cell system. The cathode chamber (working electrode) and the anode chamber (contrast electrode) are separated by ionic membrane (provided by the user), and the two chambers are sealed and linked by a chain, which facilitates the replacement of the diaphragm. The electrode and the working electrode are in the same room, which effectively reduces the R drop.

8. The glass sealing part of the electrolytic cell adopts an external threaded design, and the inner core adopts a 360-degree rotating PTFE, so that the electrode accurately corresponds to the channel (generally the electrode is parallel to the membrane) and is sealed by tightening the outer cover of POM material. .

9. The sealing of the electrode part of the electrolytic cell is realized on the PTFE plug, and the sealing effect is achieved by squeezing the O ring by the sealing screw

10. The electrolytic cell is equipped with an aeration device that can be ventilated below the liquid surface, and the atmosphere is different according to the experiment, such as straight aeration for carbon reduction and L-type aeration for nitrogen reduction. .

11. The electrolytic cell can add a sampling port on the cell body, at this time an additional cost is required. 12. The electrolytic cell is divided into two forms: single-layer and double-layer. The double-layer has the function of a constant temperature water bath on the basis of the single layer. The circulating constant temperature water is continuously introduced into the jacket layer of the electrolytic cell to make the inside of the electrolytic cell The test solution reaches a constant temperature effect.

13. The 10ml electrolytic cell is designed with internal thread, please refer to C024-10 for details