C025 replaceable membrane 3H electrolytic cell Well Sealed

1. The electrolytic cell is upgraded on the basis of C008-1, adding a light window

2. The light window of the electrolytic cell is made of quartz, and the light transmittance is greater than 95%

3. The light window part of the electrolytic cell and the cell body are connected by a lock ring to ensure sealing and facilitate the replacement of the quartz light window.

4. The electrolytic cell separates the reference electrode and the working electrode, which are connected by a Lukin capillary, which effectively reduces the R drop.

5. The hole diameter of the tip part of the electrolytic cell Lukin capillary projecting into the working electrode chamber is less than 0.2mm.

6. Agar can be added to the Lukin capillary of the electrolytic cell to reduce the flow rate of the electrolyte.

7. The reference electrode chamber of the electrolytic cell is sealed with internal threads, which must be sealed during use to effectively avoid liquid seepage between the reference electrode chamber and the working electrode chamber due to the communicating device effect.

8. The working electrode, auxiliary electrode, and reference electrode of the electrolytic cell can be matched according to needs, and the matched electrodes must be lengthened.

9. The cell body of the electrolytic cell is made of high borosilicate glass, and most of the single-layer cell body has an overhead layer design, which effectively eliminates solution hiding

10. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml, and it can also be customized according to requirements.

11. The glass part of the reference electrode chamber of the electrolytic cell adopts internal thread design

12. The electrolytic cell is a relatively sealed electrolytic cell system. The anode and cathode compartments are separated by ion membranes (provided by the user). The two compartments are sealed and linked by a chain to facilitate the replacement of the diaphragm.

13. The glass sealing part of the working electrode chamber and the comparative electrode chamber of the electrolytic cell adopts external thread design, and the inner core adopts 360-degree rotating PTFE, so that the electrode accurately corresponds to the channel (generally the electrode is parallel to the membrane). Seal by tightening the outer cover made of POM material.

14. The electrode part of the electrolytic cell is sealed on the polytetrafluoroethylene plug, and the sealing screw is used to squeeze the O ring to achieve the sealing effect.

15. The electrolytic cell is equipped with an aeration device that can ventilate below the liquid surface. Aeration devices of different shapes are selected for the atmosphere according to different experiments. For example, straight aeration is used for carbon reduction, and L-type aeration is used for nitrogen reduction.

16. The electrolytic cell can add a sampling port on the cell body, and an additional cost is required at this time. 17. The electrolytic cell is a relatively sealed system. If an absolute sealing method is required, a valve must be added to the lid of the electrolytic cell. Please refer to C025-2 model.

18. The electrolytic cell is divided into two forms: single-layer and double-layer. The double-layer adds a constant temperature water bath function on the basis of the single layer. The circulating constant temperature water is continuously passed into the jacket layer of the electrolytic cell to make the inside of the electrolytic cell The test solution reaches a constant temperature effect.

19. The 10ml electrolytic cell is designed with internal thread, please refer to "C025-10" for details