C026-2 full tetrafluoride electrochemical cell-1

1. The electrolytic cell is a photoelectrochemical cell

2. The electrolytic cell window is made of quartz glass, with a light transmittance of more than 95%

3. The working electrode of the electrolytic cell can be made of non-standard samples, but the holes of a fixed area need to be covered. 4. The electrolytic cell has a fixed area of ​​1 square centimeter, or it can be customized

5. The electrolytic cell is screwed into the back of the screw to hold the working sample, and the working electrode is used to compress the fixed area hole to achieve the cell body seal.

6. The standard area of ​​the electrolytic cell is 1 square centimeter or it can be customized according to requirements

7. The auxiliary electrode and reference electrode of the electrolytic cell must be customized to match the electrolytic cell.

8. The electrode part of the electrolytic cell realizes the internal plugging and unplugging of the electrode through the earphone jack on the cover, so that the electrode system is absolutely sealed.

9. The material of the electrolytic cell is polytetrafluoroethylene

10. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml, and it can also be customized according to requirements.

11. The body part of the electrolytic cell adopts an external threaded port design, and the inner core of the cover adopts a 360-degree rotating PTFE, so that the electrode accurately corresponds to the channel (the general electrode is parallel to the light window). The outer cover is sealed.

12. The electrolytic cell is equipped with an aeration device that can ventilate under the liquid surface, and the atmosphere is carried out according to different experiments.

13. The electrolytic cell can add a sampling port on the cell body, and an additional cost is required at this time. 14. The quartz plate of the electrolytic cell is removable and can be quickly replaced