C026-2 full tetrafluoride electrochemical cell-2

1. The electrolytic cell is a photoelectrochemical cell

2. The electrolytic cell window is made of quartz glass, with a light transmittance of more than 95%

3. The working electrode of the electrolytic cell can use non-standard samples, but the holes of a fixed area need to be covered. 4. The electrolytic cell has a fixed area of ​​1 square centimeter, or it can be customized

5. The electrolytic cell is screwed into the back of the screw to hold the working sample, and the working electrode is used to compress a fixed area hole to seal the cell body.

6. The standard area of ​​the electrolytic cell is 1 square centimeter or it can be customized according to requirements

7. The auxiliary electrode and reference electrode of the electrolytic cell can be matched according to the needs. The diameter of the electrode rod is 6mm, and the rod must be extended.

8. The material of the electrolytic cell is polytetrafluoroethylene

9. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml. 10. The body of the electrolytic cell adopts an external threaded port design, and the inner core of the lid adopts a 360-degree rotating PTFE, so The electrode accurately corresponds to the channel (generally the electrode is parallel to the light window), and is sealed by tightening the outer cover made of PTFE material.

11. The electrode part of the electrolytic cell is sealed on the PTFE plug, and the sealing effect is achieved by squeezing 0 turns of the sealing screw.

12. The electrolytic cell is equipped with an aeration device that can ventilate under the liquid surface, and the atmosphere is carried out according to different experiments.

13. The electrolytic cell can add a sampling port on the cell body, and an additional cost is required at this time. 14. The quartz plate of the electrolytic cell is removable and can be quickly replaced