C026 full tetrafluoride electrolytic cell-1

1. The electrolytic cell is a photoelectrochemical cell

2. The electrolytic cell window is made of quartz glass, with a light transmittance of more than 95%

3. The working electrode, auxiliary electrode, and reference electrode of the electrolytic cell can be matched according to the needs, and the electrode rod diameter is 6mm, all of which must be extended

4. The cell body material of the electrolytic cell is PTFE

5. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml, and it can also be customized according to requirements.

6. The body part of the electrolytic cell adopts an external threaded port design, and the inner core of the cover adopts a 360-degree rotating PTFE, so that the electrode accurately corresponds to the channel (the general electrode is parallel to the light window). The outer cover is sealed.

7. The sealing of the electrode part of the electrolytic cell is realized on the PTFE plug, and the sealing effect is achieved by squeezing the O ring by the sealing screw

8. The electrolytic cell is equipped with an aeration device that can ventilate below the liquid surface, and the atmosphere is carried out according to different experiments.

9. The electrolytic cell can add a sampling port on the cell body, and an additional cost is required at this time. 10. The quartz plate of the electrolytic cell is removable and can be quickly replaced