C027 full tetrafluoroethylene replaceable membrane electrolytic cell Well sealed

1. The electrolytic cell is actually upgraded on the basis of C13378FD

2. The electrolytic cell realizes atmosphere protection by adding a valve [] and aeration device, and the valve connected to the aeration device is the air inlet direction

3. The electrolytic cell is an absolutely sealed system and can be evacuated (less than -0.5Mpa) through a valve. The electrolytic cell can be slightly pressurized, and the pressure should not be greater than 0.5MPa for safety reasons.

4. The working electrode, auxiliary electrode and reference electrode of the electrolytic cell must be customized to match the electrolytic cell.

5. The electrode part of the electrolytic cell realizes the internal plugging and unplugging of the electrode through the earphone jack on the cover, so that the electrode system is absolutely sealed.

6. The material of the electrolytic cell is polytetrafluoroethylene

7. This electrolytic cell is often used in three-electrode systems. The volume of the electrolytic cell ranges from 30ml to 500ml, and it can also be customized according to requirements. Please note that the minimum volume is 30ml

8. The electrolytic cell is an absolutely sealed electrolytic cell system. The cathode chamber (working electrode) and the anode chamber (contrast electrode) are separated by ionic membranes (provided by the user). The ratio electrode and the working electrode are in the same room. 9. The cell body sealing part of the electrolytic cell adopts an external threaded port design, and the inner core adopts a 360-degree rotating PTFE, so that the electrode accurately corresponds to the light window and is sealed by tightening the outer cover .

10. The electrolytic cell is equipped with an aeration device that can ventilate below the liquid surface. Aeration devices of different shapes can be selected for the atmosphere according to different experiments. For example, straight aeration is used for carbon reduction, and L-type aeration is used for nitrogen reduction. .

11. The electrolytic cell can add a sampling port on the cell body, at this time an additional cost is required. 12. The quartz plate of the electrolytic cell can be quickly disassembled and replaced, and the ion membrane can be quickly replaced