C032-2 full PTFE H type replaceable membrane electrolytic cell

1. The working electrode, auxiliary electrode and reference electrode of the electrolytic cell can be matched according to needs, and the matched electrodes must be lengthened

2. The material of the electrolytic cell is polytetrafluoroethylene

3. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml, and it can also be customized according to requirements.

4. The electrolytic cell is a relatively sealed electrolytic cell system. The cathode chamber (working electrode) and the anode chamber (contrast electrode) are separated by ionic membranes (provided by the user). The two chambers are sealed and linked by nails, which facilitates the replacement of the diaphragm. The ratio electrode and the working electrode are in the same room, which effectively reduces the R drop.

5. The cell body sealing part of the electrolytic cell adopts an internal threaded port design, and the electrode part sealing is realized on the PTFE cell body, and the sealing effect is achieved by squeezing the O ring by the sealing screw

6. The electrolytic cell is equipped with a device that can ventilate below the liquid surface, and the atmosphere is carried out according to different experiments.

7. The quartz plate of the electrolytic cell can be quickly disassembled and replaced