Replaceable membrane H-type electrolytic cell Relatively sealed

1. The working electrode, auxiliary electrode, and reference electrode of the electrolytic cell can be matched as required, and the matched electrodes must be lengthened.

2. The cell body of the electrolytic cell is made of high borosilicate glass, and most of the single-layer cell body has an overhead layer design, which effectively eliminates solution hiding.

3. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml and can also be customized according to requirements.

4. The electrolytic cell is a relatively sealed electrolytic cell system. The cathode chamber (working electrode) and the anode chamber (contrast electrode) are separated by ionic membrane (provided by the user), and the two chambers are sealed and linked by a chain, which is convenient to replace the diaphragm. The electrode and the working electrode are in the same room, which effectively reduces the R drop.

5. The glass sealing part of the electrolytic cell adopts an external threaded design, and the inner core adopts a 360-degree rotating PTFE, so that the electrode accurately corresponds to the channel (generally the electrode is parallel to the membrane), and is sealed by tightening the outer cover of POM material .

6. The sealing of the electrode part of the electrolytic cell is realized on the polytetrafluoroethylene plug, and the sealing effect is achieved by squeezing the O ring by the sealing screw.

7. The electrolytic cell is equipped with an aeration device that can ventilate below the liquid surface. The atmosphere is different according to the experiment, such as straight aeration for carbon reduction and L-type aeration for nitrogen reduction.

8. The electrolytic cell can add a sampling port on the cell body, and an additional cost is required at this time. 9. The electrolytic cell is a relatively sealed system. If you need to use an absolute sealed method, please refer to model C007-2.

10. The 10ml electrolytic cell is designed with internal thread, and its shape is completely different from C007 series. For details, please refer to "C007-10"

11. The electrolytic cell is divided into two types: single-layer and double-layer.

12. The double layer adds the function of a constant temperature water bath on the basis of a single layer. The constant temperature water is continuously passed into the jacket layer of the electrolytic cell to make the measured solution in the electrolytic cell reach a constant temperature effect.