Replaceable membrane H-type electrolytic cell Absolutely sealed

1. The electrolytic cell is upgraded on the basis of C007-1

2. The electrolytic cell realizes atmosphere protection by adding a valve] and aeration device, and the valve connected to the aeration device is the direction of air intake.

3. The electrolytic cell is an absolutely sealed system and can be evacuated through a valve (less than -1 Mpa). The electrolytic cell can be slightly pressurized, and the pressure cannot be greater than 0.5 MPa for safety reasons.

Due to process limitations, the inner glass of the double-layer electrolytic cell is relatively weak, so pressurization is prohibited. 4. The working electrode, auxiliary electrode, and reference electrode of the electrolytic cell must be customized to match the electrolytic cell.

5. The electrode part of the electrolytic cell can be inserted and removed from the inside of the electrode through the earphone jack on the cover, so that the electrode system is absolutely sealed.

6. The cell body of this electrolytic cell is made of high borosilicate glass, and most of the single-layer cell bodies are designed with overhead layers, which can effectively eliminate solution hiding.

7. This electrolytic cell is often used in a three-electrode system. The volume of the electrolytic cell ranges from 30ml to 500ml and can also be customized according to requirements. Please note that the minimum volume is 30ml

8. The electrolytic cell is an absolutely sealed electrolytic cell system. The cathode chamber (working electrode) and the anode chamber (contrast electrode) are separated by ionic membranes (provided by the user). The two chambers are sealed and linked by a chain, which facilitates the replacement of the diaphragm. The reference electrode and the working electrode are in the same room, which effectively reduces the R drop.

9. The glass sealing part of the electrolytic cell adopts an external threaded design, and the inner core adopts a 360-degree rotating PTFE, so that the electrode accurately corresponds to the light window, and is sealed by tightening the outer cover of POM material.

10. The electrolytic cell is equipped with an aeration device that can ventilate below the liquid surface, and aeration devices of different shapes are selected for the atmosphere according to different experiments. For example, straight aeration is used for carbon reduction, and L-type aeration is used for nitrogen reduction.

11. The electrolytic cell can add a sampling port on the cell body, at this time an additional cost is required. 12. The electrolytic cell is divided into two forms: single-layer and double-layer

13. The double layer adds the function of a constant temperature water bath on the basis of a single layer. The constant temperature water is continuously passed through the jacket layer of the electrolytic cell to make the measured solution in the electrolytic cell reach a constant temperature effect.

14. The 10ml electrolytic cell is designed with internal thread, please refer to "C007-10" for details